Scott Aerator Night Glo LED Light Sets

An outdoor lighting set installed around a fountain at night, highlighting the warm white glow of the LED lights.

Scott Aerator Night Glo LED Light Sets

$1,059.00

Options

Quick Facts

Feature	Detail
Light Options	Two-Light or Four-Light Set
Light Type	Warm White LED
Color Temperature	2800K
Output	1,230 Lumens Per Fixture
Power	12 Volts, 12 Watts Per Fixture
Construction	Stainless Steel Fixtures and Mounting Brackets
Cord	100 Feet of Submersible Power Cord
Timer	Fully Programmable Digital Timer
Transformer	Weather-Resistant 115V to 12V Transformer

A Note Before You Order

The included transformer and control unit is a required part of the Night Glo system. Do not bypass the transformer or connect the lights directly to 110V power. Doing so can damage the fixtures, void the warranty, and create a safety hazard. Always use a GFCI-protected power supply.

Scott Aerator Night Glo LED Light Sets

Night Glo LED Light Sets add warm white illumination to new or existing fountains, creating a visible nighttime display around the moving water. The system uses stainless steel light fixtures and mounting brackets, along with a weather-resistant transformer and programmable digital timer.

Available in two-light and four-light configurations, each fixture produces 1,230 lumens at 2800K with 12 watts of power. The sets include 100 feet of submersible power cord, while longer cord lengths can be ordered when needed.

Configuration Guide

Two-Light Set

Includes two stainless steel LED fixtures, two mounting brackets, and 100 feet of submersible electric power cord.

The set includes the weather-resistant transformer and programmable digital timer required to operate the lights.

Four-Light Set

Includes four stainless steel LED fixtures, four mounting brackets, and 100 feet of submersible electric power cord.

The four-light configuration also includes the weather-resistant transformer and programmable digital timer required to operate the system.

Cord Length

The standard configuration includes 100 feet of submersible power cord. Longer cord lengths are available to accommodate installations requiring additional distance between the fountain and transformer.

Specifications & Details

Specification	Detail
Light Configurations	Two-Light or Four-Light Set
Light Type	LED
Color	Warm White
Color Temperature	2800K
Light Output	1,230 Lumens Per Fixture
Power Consumption	12 Watts Per Fixture
Operating Voltage	12 Volts
Input Power	115V
Power Cord	100 Feet Standard; Longer Lengths Available
Fixture Material	Stainless Steel
Transformer	Weather-Resistant 115V to 12V Transformer
Timer	Fully Programmable Digital Timer
Power Protection	GFCI-Protected Power Supply Required

Installation & Assembly

Mounting the Arms

Each stainless steel arm attaches to the water feature using the existing float hardware. The arms should be oriented with the “L” facing upward and secured using the provided hardware.

Positioning the Lights

Each light attaches to the slotted end of its stainless steel arm. The fixture can be moved along the slot by loosening the lock nut, positioning the light, and tightening the nut again. Varying the light angles can help create a fuller lighting effect.

Connecting the Lights

Connect each light to the transformer control unit by aligning the connector pins and turning the connector one-half turn. Do not force or over-tighten the connection, as this can damage the O-ring or wiring.

Transformer Requirement

The transformer is an integral part of the lighting system and must remain connected. Bypassing the transformer can cause the fixtures to fail and can void the warranty. The transformer converts 115V input power to the 12V output used by the lights.

Maintenance & Winter Operation

Routine Observation

The operating equipment should be observed regularly for changes or reductions in performance. If a change is noticed, disconnect the equipment from power before inspecting the system.

Cleaning

Remove the light kit from the water at least once per year to clean the exterior. Algae, calcium, and other buildup can reduce heat transfer from the fixtures. Clean the light lenses periodically with a non-abrasive brush to maintain light output.

Winter Storage

In areas with significant freezing, remove the LED light kit from the water before winter to protect it from ice expansion pressure. Store the system in a cool location above 32°F and out of direct sunlight. Disconnect the lights from the fountain during storage.

Cable Protection

Protect the power cable from pond wildlife, equipment, and machinery that could damage the cord. Cable damage caused by these conditions is not covered under the warranty.

Warranty

Light Fixtures & Mounting Brackets

The LED fixtures and mounting brackets are covered by a 2-year warranty.

Warranty coverage is subject to the manufacturer's warranty terms and conditions.

Transformer & Power Cord

The transformer and power cord are covered by a 1-year warranty from the date of purchase.

Frequently Asked Questions

Question	Answer
What are the Night Glo LED Light Sets?	They are warm white LED lighting systems designed for use with new or existing fountains to create a nighttime lighting display.
How many lights are included?	The Night Glo system is available as a two-light or four-light set.
What color are the lights?	The fixtures produce a warm white light with a 2800K color temperature.
How bright is each light?	Each fixture produces 1,230 lumens and uses 12 watts.
How much power do the lights use?	Each fixture operates at 12 volts and uses 12 watts.
Does the system include a transformer?	Yes. The system includes a weather-resistant transformer that converts 115V input power to 12V output power for the lights.
Can the transformer be bypassed?	No. The transformer is a required component of the system. Bypassing it can damage the fixtures and void the warranty.
How long is the included power cord?	The standard light sets include 100 feet of submersible power cord. Longer cord lengths are available.
Is a GFCI required?	Yes. The installation instructions specify using a GFCI-protected power supply.
Can the lights stay in the water during winter?	In regions with significant freezing, the manufacturer recommends removing the light kit from the water to protect it from ice expansion pressure.
How often should the lights be cleaned?	The light kit should be removed from the water at least once per year for exterior cleaning. The lenses can also be cleaned periodically with a non-abrasive brush.

Downloads

Lighting Assembly

View Lighting Assembly PDF