Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator Jet Stream Fountain For Small, Residential Ponds

$2,349.00 $2,469.00
-5%
In stock
Motor: ½ hp 115 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet
  • 200 feet - Unavailable

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator Jet Stream Fountain For Small, Residential Ponds
$2,349.00 $2,469.00
$2,349.00 $2,469.00
Options
Motor: ½ hp 115 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet
  • 200 feet - Unavailable

Quick Facts

Feature Detail
Motor 1/2 HP Oil-Free Stainless Steel Submersible Motor
Voltage 115V or 230V
Flow Rate 60 Gallons Per Minute
Spray Pattern Approximately 20 Feet High
Motor Speed 3,450 RPM
Operation Designed for 24-Hour-Per-Day Operation
Water Compatibility Fresh Water and Salt Water
Minimum Pond Depth 36 Inches
Motor Warranty 5 Years

A Note Before You Order

Select the correct motor voltage for your installation. For proper operation of a 115V motor, Scott Aerator specifies that the distance from the main breaker to the fountain or aerator should not exceed 100 feet. If the distance is greater than 100 feet, select a 230V motor. A GFCI is required, and power should always be disconnected whenever swimmers are present.

Scott Aerator Jet Stream Fountain For Small, Residential Ponds

The Jet Stream Fountain creates a tight, columnar vertical spray that provides a strong visual focal point for small residential ponds. Its single vertical flume adds movement and sound to the water while also supporting circulation and oxygen transfer throughout the pond.

The small residential model uses a 1/2 HP oil-free stainless steel submersible motor and is available in 115V or 230V configurations. The fountain moves 60 gallons of water per minute and produces a spray pattern measuring approximately 20 feet high.

The Jet Stream is designed for continuous operation and can be used in both fresh and salt water. Optional light kits can be added at purchase or later for nighttime operation. The stainless steel, oil-free motor requires no oil changes, and the fountain is designed for easy installation with no control box required.

Configuration Guide

Jet Stream 1/2 HP 115V

The 1/2 HP 115V configuration provides a 60 GPM flow rate and draws 10 amps. It includes a 70-foot, 12-gauge, submersible power cord with plug.

For proper operation, the distance from the main breaker to the fountain should not exceed 100 feet.

Jet Stream 1/2 HP 230V

The 1/2 HP 230V configuration provides a 60 GPM flow rate and draws 5 amps. It includes a 70-foot, 12-gauge, submersible power cord.

The 230V configuration is recommended when the distance from the main breaker to the fountain exceeds the 100-foot limit specified for the 115V configuration.

Optional Lighting

Optional light kits can be added to the Jet Stream Fountain at the time of purchase or added later. Lighting provides a nighttime display while the fountain continues normal operation.

Specifications & Details
Specification Detail
Motor 1/2 HP Oil-Free Stainless Steel Submersible Motor
Voltage 115V or 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Motor Power 0.37 kW
Current Draw 10 Amps at 115V; 5 Amps at 230V
Flow Rate 60 Gallons Per Minute
Spray Pattern Approximately 20 Feet High
Power Cord 70 Feet Standard; Longer Cords Available
115V Cord 70 Feet, 12-Gauge, Submersible, With Plug
230V Cord 70 Feet, 12-Gauge, Submersible
Minimum Pond Depth 36 Inches
Water Compatibility Fresh Water or Salt Water
Operation 24 Hours Per Day
Maintenance No Routine Maintenance Required
Anchoring Two 25-Pound Weights or Concrete Blocks and Two Nylon Ropes Required
Installation & Assembly

Easy Installation

The Jet Stream Fountain is designed for straightforward installation in a pond with the required minimum water depth. The fountain is placed in the water and secured using the required anchoring system.

Anchoring

The small residential Jet Stream requires two 25-pound weights or concrete blocks for anchoring. Two nylon ropes are also required. Anchoring weights and ropes are not included with the fountain.

Electrical Installation

A GFCI is required for operation. The correct voltage should be selected before installation, and the electrical installation should follow the supplied assembly instructions and applicable electrical requirements.

Safety

Always disconnect power whenever swimmers are present. The fountain should be installed and operated according to the manufacturer's instructions and applicable electrical codes.

Maintenance & Winter Operation

Routine Maintenance

The Jet Stream Fountain is designed to require no routine maintenance. Its oil-free stainless steel submersible motor eliminates the need for oil changes.

Winter Operation

The fountain is designed for year-round outdoor use. Follow the manufacturer's supplied instructions for operation during freezing conditions and always disconnect power when servicing or when required by the installation instructions.

Water Flow

Keep the fountain intake and surrounding water area free of debris that could interfere with normal water movement. The manufacturer specifies no routine maintenance for the fountain motor.

Warranty

5-Year Motor Warranty

The Jet Stream Fountain motor is covered by an unconditional 5-year motor warranty from Scott Aerator, subject to the manufacturer's warranty terms.

Frequently Asked Questions
Question Answer
What is the Jet Stream Fountain designed to do? It creates a vertical columnar water display while promoting water circulation and oxygen transfer throughout the pond.
What motor size is available for the small residential model? The small residential Jet Stream Fountain uses a 1/2 HP motor available in 115V or 230V configurations.
How much water does it move? The 1/2 HP Jet Stream moves approximately 60 gallons of water per minute.
How high is the spray? The small residential model has a spray pattern measuring approximately 20 feet high.
What pond depth is required? A minimum pond depth of 36 inches is required.
Can the Jet Stream be used in salt water? Yes. The Jet Stream Fountain is approved for use in salt water and can also be used in fresh water.
Can it run continuously? Yes. The fountain is designed for 24-hour-per-day operation.
Does it require routine maintenance? No routine maintenance is required, and the oil-free motor does not require oil changes.
Are lights included? No. Optional light kits can be added at the time of purchase or installed later.
Is a GFCI required? Yes. A GFCI is required for the Jet Stream Fountain installation.
How is the fountain anchored? The small residential model requires two 25-pound weights or concrete blocks and two nylon ropes for anchoring. These items are not included.
What warranty is included? The motor carries an unconditional 5-year warranty from Scott Aerator, subject to the manufacturer's warranty terms.
Downloads

Pond Fountain Motor Specs

View Pond Fountain Motor Specs PDF

Pond Fountain Specs & Assembly

View Pond Fountain Specs & Assembly PDF

Pond Fountain Comparison Brochure

View Pond Fountain Comparison Brochure PDF