Scott Aerator Clover Fountain For Large, Commercial Ponds

A medium-sized Clover Fountain with a brass center nozzle creating a high center stream and angled spray patterns in a pond, surrounded by trees.

Scott Aerator Clover Fountain For Large, Commercial Ponds

$5,039.00 $5,299.00

Options

Quick Facts

Feature	Detail
Motor Options	2 HP or 3 HP
Voltage	230V standard; 3-phase and 50 Hz versions available
Flow Rate	135 GPM or 180 GPM
Spray Pattern	Clover pattern with vertical center plume and four angled jets
Motor	Oil-Free Stainless Steel Submersible Motor
Operation	Designed for 24-Hour-Per-Day Operation
Water Compatibility	Fresh Water and Salt Water
Motor Warranty	5 Years

A Note Before You Order

Select the correct motor voltage and configuration for your installation. A GFCI is required, and power must always be disconnected whenever swimmers are present. The 2 HP and 3 HP large commercial models use 230V motors and include a 100-foot, 10-gauge submersible power cord. Longer cord lengths are available.

Scott Aerator Clover Fountain For Large, Commercial Ponds

The Clover Fountain creates a distinctive water display with a strong vertical center plume surrounded by four angled jets that spread outward to form a recognizable clover pattern. The brass center nozzle provides the main vertical stream, while the surrounding jets create a broad display across the pond surface.

The large commercial Clover Fountain is available in 2 HP and 3 HP configurations. The 2 HP model produces a 60-foot-high by 60-foot-wide spray, while the 3 HP model reaches approximately 70 feet high and 80 feet wide. Optional LED light kits can be added to highlight the fountain after dark.

In addition to its visual display, the Clover Fountain circulates water and transfers oxygen throughout the pond. Its oil-free stainless steel submersible motor requires no oil changes or control box and is designed for continuous operation in both fresh and salt water.

Configuration Guide

Clover Fountain 2 HP

The 2 HP configuration uses a 230V oil-free motor and produces approximately 135 gallons per minute. The center plume reaches 60 feet high, with a spray width of approximately 60 feet.

This model requires a minimum pond depth of 56 inches and uses two 45-pound weights or concrete blocks for anchoring.

Clover Fountain 3 HP

The 3 HP configuration uses a 230V oil-free motor and produces approximately 180 gallons per minute. The center plume reaches 70 feet high, with a spray width of approximately 80 feet.

This model requires a minimum pond depth of 60 inches and uses two 55-pound weights or concrete blocks for anchoring.

Lighting Options

Optional LED light kits can be added when purchasing the fountain or added later. Four-light configurations are available for illuminating the Clover spray pattern after dark.

Specifications & Details

Specification	Detail
Motor	Oil-Free Stainless Steel Submersible Motor
Motor Sizes	2 HP and 3 HP
Voltage	230V
Frequency	60 Hz
Phase	Single Phase
Motor Speed	3,450 RPM
Flow Rate	135 GPM for 2 HP; 180 GPM for 3 HP
Spray Height	60 feet for 2 HP; 70 feet for 3 HP
Spray Width	60 feet for 2 HP; 80 feet for 3 HP
Minimum Depth	56 inches for 2 HP; 60 inches for 3 HP
Power Cord	100 feet standard, 10-gauge, submersible; longer cords available
Water Compatibility	Fresh Water or Salt Water
Operation	24 Hours Per Day
Warranty	5-Year Motor Warranty

Installation & Assembly

Anchoring

The fountain is anchored using two nylon ropes attached to the unit, with weighted anchors or concrete blocks positioned on the pond bottom. The 2 HP model requires two 45-pound weights or equivalent concrete blocks, while the 3 HP model requires two 55-pound weights or equivalent concrete blocks. Anchoring weights and ropes are not included.

Electrical Installation

A GFCI is required for operation. The fountain should be installed as a complete electrical package according to applicable electrical requirements, and power must be disconnected whenever swimmers are present.

Power Cord

The standard 230V configuration includes a 100-foot, 10-gauge submersible power cord. Longer cord lengths can be ordered when needed for the installation.

Maintenance & Operation

Maintenance

The oil-free submersible motor requires no oil changes, and the fountain is designed for operation without a separate control box. Scott Aerator states that the fountain requires no routine maintenance under normal operation.

Continuous Operation

The Clover Fountain is designed for 24-hour-per-day operation, providing continuous water circulation and oxygen transfer throughout the pond.

Winter Operation

The fountain can remain in the water during winter. Follow the manufacturer's instructions for freezing conditions and disconnect power whenever required by the installation and operating conditions.

Warranty

5-Year Motor Warranty

The Clover Fountain includes an unconditional 5-year motor warranty from Scott Aerator, subject to the manufacturer's warranty terms.

Frequently Asked Questions

Question	Answer
What does the Clover Fountain look like?	It produces a vertical center plume surrounded by four angled jets that spread across the pond in a clover-shaped pattern.
What motor sizes are available?	The large commercial Clover Fountain is available with 2 HP and 3 HP motor configurations.
How high does the Clover Fountain spray?	The 2 HP model reaches approximately 60 feet high, while the 3 HP model reaches approximately 70 feet high.
How wide is the spray pattern?	The 2 HP model produces a spray approximately 60 feet wide. The 3 HP model produces a spray approximately 80 feet wide.
Can the Clover Fountain be used in salt water?	Yes. The Clover Fountain is approved for use in both fresh water and salt water.
Can it run continuously?	Yes. The fountain is designed for 24-hour-per-day operation.
What pond depth is required?	The 2 HP model requires a minimum pond depth of 56 inches. The 3 HP model requires a minimum depth of 60 inches.
Does the fountain require a GFCI?	Yes. A GFCI is required for operation.
What is required to anchor the fountain?	Two nylon ropes and two weighted anchors or concrete blocks are required. The 2 HP model uses two 45-pound weights, while the 3 HP model uses two 55-pound weights.
Can lights be added?	Yes. Optional LED light kits can be added when ordering the fountain or purchased later.

Downloads

Pond Fountain Motor Specs

View Pond Fountain Motor Specs PDF

Pond Fountain Specs & Assembly

View Pond Fountain Specs & Assembly PDF

Pond Fountain Comparison Brochure

View Pond Fountain Comparison Brochure PDF