Your cart
Your cart is empty
Scott Aerator
Scott Aerator Jet Stream Fountain For Large, Commercial Ponds
Estimated delivery between October 25 and October 27.
Quick Facts
A Note Before You Order
Select the correct motor configuration and voltage before purchasing. The large commercial Jet Stream models use 230V power. A GFCI is required for operation, and power must always be disconnected whenever swimmers are present. Proper electrical installation should follow applicable electrical codes and the manufacturer's instructions.
Scott Aerator Jet Stream Fountain For Large, Commercial Ponds
The Jet Stream Fountain creates a tall, concentrated vertical spray designed to make a strong visual statement on large ponds and commercial water features. The 2 HP model produces a spray pattern reaching approximately 70 feet high, while the 3 HP model reaches up to 80 feet. Its upright water column also creates a steady sound that adds another element to the fountain display.
Beyond its appearance, the Jet Stream Fountain circulates water and transfers oxygen at the surface, supporting natural decomposition of organic matter and helping create more active water movement. The oil-free stainless steel submersible motor requires no oil changes, no control box, and no routine maintenance. The fountain is designed for both fresh and salt water and can operate continuously throughout the day.
Configuration Guide
Jet Stream Fountain 2 HP
The 2 HP configuration uses a 230V oil-free motor and produces approximately 120 gallons per minute. Its spray pattern reaches approximately 70 feet high.
A minimum pond depth of 56 inches is required. The standard power cord is 100 feet long, 10-gauge, and submersible.
Jet Stream Fountain 3 HP
The 3 HP configuration uses a 230V oil-free motor and produces approximately 155 gallons per minute. Its spray pattern reaches up to 80 feet high.
A minimum pond depth of 60 inches is required. The standard power cord is 100 feet long, 10-gauge, and submersible.
Specifications & Details
Installation & Assembly
Anchoring
The 2 HP model requires two 45-pound weights or concrete blocks for anchoring. The 3 HP model requires two 55-pound weights or concrete blocks. Anchoring weights and nylon ropes are not included with the fountain.
Electrical Installation
A GFCI is required for operation. The installation must follow the manufacturer's instructions and applicable electrical requirements. Always disconnect power before entering the water or when swimmers are present.
Power Cord
The standard 230V power cord is 100 feet long and uses 10-gauge submersible cable. Longer cord lengths can be ordered when needed for the installation.
Maintenance & Operation
Routine Maintenance
The Jet Stream Fountain is designed without routine maintenance requirements. Its oil-free submersible motor does not require oil changes, and the system does not require a control box for operation.
Continuous Operation
The fountain is designed for 24-hour-per-day operation, providing continuous water movement and surface activity when properly installed and powered.
Optional Lighting
Optional light kits can be added when purchasing the fountain or added later. Available lighting options include Night Glo and color-changing LED configurations.
Warranty
5-Year Motor Warranty
The Jet Stream Fountain includes an unconditional 5-year motor warranty from Scott Aerator Company, subject to the manufacturer's warranty terms.
Frequently Asked Questions
Downloads
Pond Fountain Motor Specs
Pond Fountain Specs & Assembly
Pond Fountain Comparison Brochure
- Choosing a selection results in a full page refresh.
- Opens in a new window.