Gusher Fountain for medium ponds by Scott Aerator
Gusher Royal Park
Gusher Royal Park
Gusher Royal Park
Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator Gusher Fountain For Medium, Residential Ponds

$2,599.00 $2,739.00
-5%
In stock
Motor: ¾ hp 115 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
  • 1½ hp 230 volts
Cord Length: 100 feet
  • 100 feet
  • 150 feet - Unavailable
  • 200 feet - Unavailable
  • 250 feet - Unavailable

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator Gusher Fountain For Medium, Residential Ponds
$2,599.00 $2,739.00
$2,599.00 $2,739.00
Options
Motor: ¾ hp 115 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
  • 1½ hp 230 volts
Cord Length: 100 feet
  • 100 feet
  • 150 feet - Unavailable
  • 200 feet - Unavailable
  • 250 feet - Unavailable

Quick Facts

Feature Detail
Motor Options ¾ HP, 1 HP, or 1½ HP
Voltage 115V or 230V, depending on motor configuration
Flow Rate 65 to 90 Gallons Per Minute
Spray Height 18 to 30 Feet, depending on motor size
Motor Oil-Free Stainless Steel Submersible Motor
Operation Designed for 24-Hour-Per-Day Operation
Water Compatibility Fresh Water and Salt Water
Motor Warranty 5 Years
Lighting Optional Light Kits Available

A Note Before You Order

Select the correct motor voltage for your installation. For proper operation of a 115V motor, the distance from the main breaker to the fountain or aerator must not exceed 100 feet. If the distance is greater than 100 feet, select a 230V motor. A GFCI is required, and power must always be disconnected when swimmers are present.

Scott Aerator Gusher Fountain For Medium, Residential Ponds

The Gusher Fountain creates a tall, dense column of water in a cascading pattern designed to remain visible in windy conditions. The medium residential models are available with ¾ HP, 1 HP, and 1½ HP motors, producing spray heights from 18 to 30 feet depending on the selected configuration.

The fountain's rapid water movement helps circulate and oxygenate the pond while supporting water clarity and a healthy aquatic environment. Its stainless steel, oil-free submersible motor is designed for continuous operation with no oil changes, no control box, and no routine maintenance required. Optional light kits can also be added to extend the fountain display into the evening.

Configuration Guide

Gusher Fountain ¾ HP

Available in 115V or 230V with a 65 GPM flow rate. The ¾ HP model produces an 18-foot spray pattern and requires a minimum pond depth of 36 inches.

The 115V version includes a 70-foot, 10-gauge submersible power cord with plug. The 230V version includes a 70-foot, 12-gauge submersible power cord.

Gusher Fountain 1 HP

Available in 115V or 230V with a 70 GPM flow rate. The 1 HP model produces a 23-foot spray pattern and requires a minimum pond depth of 44 inches.

The 115V version includes a 100-foot, 10-gauge submersible power cord with plug. The 230V version includes a 100-foot, 12-gauge submersible power cord.

Gusher Fountain 1½ HP

The 1½ HP model uses a 230V motor and produces a 90 GPM flow rate. Its spray pattern reaches approximately 30 feet and requires a minimum pond depth of 50 inches.

The 1½ HP configuration includes a 100-foot, 12-gauge submersible power cord, with longer cord lengths available to order.

Specifications & Details
Specification Detail
Motor Stainless Steel, Oil-Free Submersible Motor
Motor Sizes ¾ HP, 1 HP, and 1½ HP
Voltage 115V or 230V; 1½ HP is 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Flow Rate 65 GPM for ¾ HP; 70 GPM for 1 HP; 90 GPM for 1½ HP
Spray Height 18 feet for ¾ HP; 23 feet for 1 HP; 30 feet for 1½ HP
Minimum Depth 36 inches for ¾ HP; 44 inches for 1 HP; 50 inches for 1½ HP
Power Cord 70 feet standard for ¾ HP; 100 feet standard for 1 HP and 1½ HP; longer cords available
Water Compatibility Fresh Water or Salt Water
Operation 24 Hours Per Day
Maintenance No Routine Maintenance Required
Lighting Optional Light Kits Available
Installation & Assembly

Easy Installation

The Gusher Fountain is designed for straightforward installation in the pond. The fountain is secured in position using two nylon anchoring ropes connected to weighted anchors or concrete blocks on the pond bottom.

Anchoring

Two nylon ropes are required for anchoring and are attached to the fountain. The required anchor weights depend on the motor configuration. Two 20-pound weights or concrete blocks are required for the ¾ HP model, two 35-pound weights for the 1 HP model, and two 45-pound weights for the 1½ HP model. Anchoring ropes and weights are not included.

Electrical Installation

A GFCI is required for operation. Select the correct voltage before installation, and always disconnect power whenever swimmers are present. The manufacturer specifies that 115V installations should not exceed 100 feet between the main breaker and the fountain or aerator.

Maintenance & Winter Operation

Routine Maintenance

The Gusher Fountain uses an oil-free, stainless steel submersible motor and is designed to operate without routine maintenance. There is no oil to change and no control box required.

Winter Operation

The fountain can remain in the pond during winter. Shut off the power during freezing conditions and restore power after the ice thaws. The manufacturer states that Scott Aerator fountains are designed to withstand sub-zero temperatures without damage.

Salt Water Use

The Gusher Fountain is approved for use in salt water as well as fresh water, making it suitable for a range of pond and water-feature environments.

Warranty

5-Year Motor Warranty

The Gusher Fountain includes an unconditional 5-year motor warranty from Scott Aerator Company. The fountain is manufactured with a stainless steel, oil-free, submersible motor.

Frequently Asked Questions
Question Answer
What is the Gusher Fountain designed to do? It creates a tall, dense vertical column of water while circulating and oxygenating the pond.
What motor sizes are available? The medium residential Gusher is available in ¾ HP, 1 HP, and 1½ HP configurations.
How high does the fountain spray? The ¾ HP model reaches approximately 18 feet, the 1 HP model reaches 23 feet, and the 1½ HP model reaches 30 feet.
Can the Gusher be used in salt water? Yes. The Gusher Fountain is approved for use in both fresh water and salt water.
Can it run continuously? Yes. The Gusher Fountain is designed for 24-hour-per-day operation.
What pond depth is required? The ¾ HP model requires a minimum depth of 36 inches, the 1 HP model requires 44 inches, and the 1½ HP model requires 50 inches.
Does it require routine maintenance? No routine maintenance is required. The motor is oil-free and there is no oil to change or control box required.
Can it stay in the pond during winter? Yes. The fountain can remain in the pond during winter. Power should be turned off during freezing conditions and restored after the ice thaws.
Is a GFCI required? Yes. A GFCI is required for operation.
Can I use the fountain while swimmers are present? No. Power must always be disconnected when swimmers are present.
Are lights available? Yes. Optional light kits can be added at purchase or later.
What warranty is included? The fountain includes an unconditional 5-year motor warranty from Scott Aerator Company.
Downloads

Pond Fountain Motor Specs

View Pond Fountain Motor Specs PDF

Pond Fountain Specs & Assembly

View Pond Fountain Specs & Assembly PDF

Pond Fountain Comparison Brochure

View Pond Fountain Comparison Brochure PDF

Product Video

Watch the Gusher Fountain video for a visual look at the fountain's spray pattern, operation, and installation.