Scott Aerator Baystone Fountain For Small, Residential Ponds
Scott Aerator Baystone Fountain For Small, Residential Ponds
Scott Aerator Baystone Fountain For Small, Residential Ponds
Scott Aerator Baystone Fountain For Small, Residential Ponds
Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator Baystone Fountain For Small, Residential Ponds

$2,349.00 $2,469.00
-5%
In stock
Motor: ½ hp 115 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet - Unavailable
  • 150 feet - Unavailable
  • 200 feet - Unavailable

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator Baystone Fountain For Small, Residential Ponds
$2,349.00 $2,469.00
$2,349.00 $2,469.00
Options
Motor: ½ hp 115 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet - Unavailable
  • 150 feet - Unavailable
  • 200 feet - Unavailable

Quick Facts

Feature Detail
Motor Options 1/2 HP or 3/4 HP
Voltage 115V or 230V
Spray Pattern Center Peak with Traditional Outer Spray
Spray Size Up to 8' High x 20' Wide or 10' High x 25' Wide
Flow Rate 50 GPM or 65 GPM
Motor Oil-Free Stainless Steel Submersible Motor
Operation Designed for 24-Hour-Per-Day Operation
Water Compatibility Fresh Water and Salt Water
Motor Warranty 5 Years

A Note Before You Order

Select the correct motor voltage for your installation. Scott Aerator specifies that a 115V motor should not be more than 100 feet from the main breaker. If the distance exceeds 100 feet, select a 230V motor. A GFCI is required, and the manufacturer recommends using a licensed electrical contractor. Do not use an extension cord to supply power to the motor. Always disconnect power when swimmers are present.

Scott Aerator Baystone Fountain For Small, Residential Ponds

The Baystone Fountain creates a distinctive center peak surrounded by a traditional outer spray pattern. Designed for small residential ponds, it combines a visible water display with circulation that helps support a healthy aquatic environment.

Available in 1/2 HP and 3/4 HP configurations with 115V or 230V motor options, the Baystone uses an oil-free stainless steel submersible motor and is designed for continuous operation. The fountain is approved for salt water, requires no routine motor maintenance, and can remain in the pond through winter when the power is turned off during freezing conditions.

Configuration Guide

Baystone 1/2 HP

Available with a 115V or 230V oil-free motor and a 50 GPM flow rate. The 1/2 HP configuration produces a spray up to 8 feet high and 20 feet wide.

A minimum pond depth of 36 inches is required. Two 25-pound weights or concrete blocks and two nylon anchoring ropes are required for installation and are not included.

Baystone 3/4 HP

Available with a 115V or 230V oil-free motor and a 65 GPM flow rate. The 3/4 HP configuration produces a spray up to 10 feet high and 25 feet wide.

A minimum pond depth of 44 inches is required. Two 20-pound weights or concrete blocks and two nylon anchoring ropes are required for installation and are not included.

Specifications & Details
Specification Detail
Motor Oil-Free Stainless Steel Submersible Motor
Motor Sizes 1/2 HP and 3/4 HP
Voltage 115V or 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Flow Rate 50 GPM for 1/2 HP; 65 GPM for 3/4 HP
Minimum Pond Depth 36 inches for 1/2 HP; 44 inches for 3/4 HP
Power Cord 70 feet supplied; cable specifications vary by motor configuration
1/2 HP Current Draw 10 A at 115V; 5 A at 230V
3/4 HP Current Draw 10.7 A at 115V; 6.8 A at 230V
Water Compatibility Fresh Water or Salt Water
Operation 24 Hours Per Day
Nozzle Baystone Brass Nozzle Included
Lighting Light Kits Available Separately
Installation & Assembly

Included Components

The fountain assembly includes the float platform, pump assembly, stainless steel filter, two stainless steel bolts with nuts and washers, and three stainless steel screws.

Assembly

The float platform is secured to the fountain housing with the supplied hardware. The stainless steel filter is installed beneath the unit using the supplied screws. Once the fountain is placed in the water, the Baystone fountain head is screwed into position.

Anchoring

Two nylon anchoring ropes attach to the stainless steel eye bolts. The fountain can be secured to shore or anchored with two concrete blocks submerged at least 20 feet apart. Anchoring ropes and weights are not included.

Electrical Installation

A GFCI is required for operation, and the installation instructions recommend using a licensed electrical contractor. Do not use an extension cord to supply power to the motor. Always disconnect power when swimmers are present.

Maintenance & Winter Operation

Routine Maintenance

The fountain requires little routine maintenance. When the unit is removed from the water, the manufacturer recommends washing it with high-pressure water and visually inspecting the fountain to make sure nothing is restricting water flow.

Winter Operation

The fountain is designed to remain in the water during winter. Turn off the power supply during freezing conditions and restore power after the water thaws. The manufacturer states that the components can withstand sub-zero conditions without damage. Removing the fountain for winter can allow the pump seals to dry out.

Anchoring Rope Replacement

Quality nylon anchoring rope that is 3/8 inch or thicker should be replaced every five years. This is also a good opportunity to clean and inspect the fountain for debris or restrictions to water flow.

Warranty

5-Year Motor Warranty

The motor is covered by a 5-year warranty against defects in materials or workmanship under normal operating conditions.

Other product components are covered by a 1-year warranty from the date of purchase, subject to the manufacturer's warranty terms.

Frequently Asked Questions
Question Answer
What spray pattern does the Baystone Fountain produce? The Baystone produces a center peak surrounded by a traditional outer spray pattern.
What motor sizes are available? The small residential Baystone Fountain is available with 1/2 HP and 3/4 HP motors.
What spray size does the 1/2 HP model produce? The 1/2 HP model produces a spray up to 8 feet high and 20 feet wide.
What spray size does the 3/4 HP model produce? The 3/4 HP model produces a spray up to 10 feet high and 25 feet wide.
Can the Baystone Fountain be used in salt water? Yes. The manufacturer states that the Baystone Fountain is approved for salt water as well as fresh water.
Can it run continuously? Yes. The Baystone Fountain is designed for 24-hour-per-day operation.
What pond depth is required? The 1/2 HP model requires a minimum pond depth of 36 inches. The 3/4 HP model requires a minimum depth of 44 inches.
Is a GFCI required? Yes. A GFCI Ground Fault Circuit Interrupter is required for the fountain installation.
Can I use an extension cord? No. The manufacturer specifically states that an extension cord should not be used to supply power to the motor.
How is the fountain anchored? Two nylon anchoring ropes attach to the fountain's eye bolts. The fountain can be secured to shore or anchored with two concrete blocks submerged at least 20 feet apart.
Does the fountain need to be removed during winter? No. The manufacturer recommends leaving the fountain in the water, turning off the power during freezing conditions, and restoring power after the water thaws.
Downloads

Pond Fountain Motor Specs

View Pond Fountain Motor Specs PDF

Pond Fountain Specs & Assembly

View Pond Fountain Specs & Assembly PDF