Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator North Star Fountain Aerator for Small, Residential Ponds

$1,799.00 $1,899.00
-5%
In stock
Motor: ⅓ hp 115 volts
  • ⅓ hp 115 volts
  • ⅓ hp 230 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet
  • 200 feet - Unavailable

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator North Star Fountain Aerator for Small, Residential Ponds
$1,799.00 $1,899.00
$1,799.00 $1,899.00
Options
Motor: ⅓ hp 115 volts
  • ⅓ hp 115 volts
  • ⅓ hp 230 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet
  • 200 feet - Unavailable

Quick Facts

Feature Detail
Motor Options 1/3 HP, 1/2 HP, or 3/4 HP
Voltage 115V or 230V
Flow Rate 300, 400, or 450 Gallons Per Minute
Spray Pattern 5 to 8 feet high and 12 to 16 feet wide, depending on motor size
Design Floating Fountain Aerator for Small Residential Ponds
Motor Oil-Free Stainless Steel Submersible Motor
Operation Designed for 24-Hour Continuous Operation
Water Compatibility Fresh Water and Salt Water
Motor Warranty 5 Years

A Note Before You Order

Select the correct motor voltage and cord length for your installation before ordering. For 115V operation, the distance from the main breaker to the fountain or aerator must not exceed 100 feet for proper operation. A GFCI is required, and power must always be disconnected when swimmers are present.

Scott Aerator North Star Fountain Aerator for Small, Residential Ponds

The North Star Fountain Aerator combines pond aeration with a decorative fountain display. Designed for smaller residential ponds, it circulates large volumes of water while creating a visible spray pattern that adds movement and water circulation to the pond.

The small North Star is available with 1/3 HP, 1/2 HP, and 3/4 HP oil-free motors in 115V or 230V configurations. Depending on the motor selected, the unit delivers 300 to 450 gallons per minute and produces a spray pattern from 5 feet high by 12 feet wide up to 8 feet high by 16 feet wide. Optional lighting can be added at the time of purchase or later for nighttime operation.

Configuration Guide

North Star 1/3 HP

Available in 115V or 230V with a 300 GPM flow rate. The spray pattern measures approximately 5 feet high by 12 feet wide.

Designed for ponds up to 3/4 acre and requires a minimum water depth of 32 inches.

North Star 1/2 HP

Available in 115V or 230V with a 400 GPM flow rate. The spray pattern measures approximately 6 feet high by 14 feet wide.

Designed for ponds greater than 1/8 acre and requires a minimum water depth of 32 inches.

North Star 3/4 HP

Available in 115V or 230V with a 450 GPM flow rate. The spray pattern measures approximately 8 feet high by 16 feet wide.

Designed for ponds greater than 1/8 acre and requires a minimum water depth of 34 inches.

Specifications & Details
Specification Detail
Motor Oil-Free Stainless Steel Submersible Motor
Motor Sizes 1/3 HP, 1/2 HP, and 3/4 HP
Voltage 115V or 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Flow Rate 300, 400, or 450 GPM
Spray Pattern 5 ft x 12 ft for 1/3 HP; 6 ft x 14 ft for 1/2 HP; 8 ft x 16 ft for 3/4 HP
Minimum Depth 32 inches for 1/3 HP and 1/2 HP; 34 inches for 3/4 HP
Power Cord 70 feet standard; longer cords available
115V Cord 70-foot, 12-gauge submersible cord with plug
230V Cord 70-foot, 12-gauge submersible cord
Water Compatibility Fresh Water or Salt Water
Operation 24 Hours Per Day
Maintenance No Routine Maintenance Required
Warranty 5-Year Motor Warranty
Installation & Assembly

Anchoring

The North Star requires two nylon anchoring ropes and two weighted anchors or concrete blocks. The 1/3 HP model uses two 20-pound weights, while the 1/2 HP and 3/4 HP models use two 25-pound weights. Anchoring materials are not included.

Electrical Installation

A GFCI is required for operation. Select the correct voltage for the installation and follow the manufacturer's electrical requirements. Power must be disconnected whenever swimmers are present.

Installation

The North Star is designed for straightforward floating installation. The unit is positioned in the pond, secured with the required anchoring lines and weights, and connected to the appropriate electrical supply.

Maintenance & Winter Operation

Routine Maintenance

The North Star uses an oil-free submersible motor and is designed to operate without routine maintenance. There is no motor oil to change and no control box required.

Winter Operation

The North Star can remain in the pond during winter. Turn off the power during freezing conditions and leave the unit in place. Once the ice has thawed, power can be restored and the fountain can resume operation.

Salt Water Use

The North Star is approved for use in both fresh water and salt water applications.

Lighting Options

Optional Fountain Lighting

Optional lighting sets can be added when purchasing the North Star or installed at a later time. Available options include color-changing LED two-light and four-light sets as well as LED Night Glo two-light and four-light sets.

Warranty

5-Year Motor Warranty

The North Star motor is covered by Scott Aerator's 5-year motor warranty. Warranty coverage is subject to the manufacturer's warranty terms and conditions.

Frequently Asked Questions
Question Answer
What is the North Star designed to do? It combines fountain display with pond aeration, circulating water while transferring oxygen throughout the pond.
What motor sizes are available? The small residential North Star is available in 1/3 HP, 1/2 HP, and 3/4 HP configurations.
What voltage options are available? The North Star is available with 115V or 230V motor configurations.
How much water does the North Star move? Flow rates range from 300 GPM with the 1/3 HP model to 450 GPM with the 3/4 HP model.
What pond size is the 1/3 HP model designed for? The 1/3 HP North Star is designed for ponds up to 3/4 acre.
What pond depth is required? The 1/3 HP and 1/2 HP models require a minimum depth of 32 inches. The 3/4 HP model requires a minimum depth of 34 inches.
Can the North Star be used in salt water? Yes. The North Star is approved for both fresh water and salt water use.
Can it run continuously? Yes. The North Star is designed for 24-hour-per-day operation.
Does the North Star require winterizing? The unit can remain in the pond during winter. Power should be turned off during freezing conditions and restored after the water thaws.
Is a GFCI required? Yes. A GFCI is required for the North Star installation.
Can lighting be added later? Yes. Compatible lighting options can be added when ordering or installed at a later time.
Downloads

Specs & Assembly

View Specs & Assembly PDF

Aerator Comparison Brochure

View Aerator Comparison Brochure PDF

Product Video

Watch the North Star assembly and installation video for a visual guide to setting up the fountain aerator.