Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator DA-20 Display Aerator for Medium, Residential Ponds

$2,449.00 $2,579.00
-5%
In stock
Motor: 1 hp 115 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
  • 1½ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet - Unavailable
  • 200 feet - Unavailable
  • 250 feet - Unavailable

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator DA-20 Display Aerator for Medium, Residential Ponds
$2,449.00 $2,579.00
$2,449.00 $2,579.00
Options
Motor: 1 hp 115 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
  • 1½ hp 230 volts
Cord Length: 70 feet
  • 70 feet
  • 100 feet
  • 150 feet - Unavailable
  • 200 feet - Unavailable
  • 250 feet - Unavailable

Quick Facts

Feature Detail
Motor Options 1 HP or 1.5 HP
Voltage 1 HP: 115V or 230V; 1.5 HP: 230V
Flow Rate 500 GPM or 600 GPM
Spray Pattern 7 feet high x 25 feet wide or 10 feet high x 25 feet wide
Motor Oil-Free Stainless Steel Submersible Motor
Operation Designed for 24-Hour-Per-Day Operation
Water Compatibility Fresh Water and Salt Water
Motor Warranty 5 Years
Lighting Optional Light Kits Available

A Note Before You Order

Select the correct motor voltage for your installation. A GFCI is required, and Scott Aerator recommends using a licensed electrical contractor for the electrical connection. Do not use an extension cord to supply power to the motor. Always disconnect power whenever swimmers are present. The 1 HP model is available in 115V or 230V, while the 1.5 HP model requires 230V power.

Scott Aerator DA-20 Display Aerator for Medium, Residential Ponds

The DA-20 Display Aerator is designed for medium-sized residential ponds where strong water movement and an attractive fountain display are both important. Its trumpet-shaped spray moves up to 500 gallons of water per minute with the 1 HP configuration and up to 600 gallons per minute with the 1.5 HP configuration, while adding oxygen to the pond.

The 1 HP DA-20 produces a spray approximately 7 feet high and 25 feet wide, while the 1.5 HP model produces a spray approximately 10 feet high and 25 feet wide. The oil-free stainless steel submersible motor is designed for continuous operation and is approved for fresh and salt water. Optional light kits can also be added to create a nighttime display.

Configuration Guide

DA-20 1 HP

Available in 115V or 230V with a 500 GPM flow rate. The 1 HP model produces a spray approximately 7 feet high and 25 feet wide.

The 1 HP configuration is intended for ponds greater than 1/8 acre and requires a minimum water depth of 36 inches. The 115V version includes a 70-foot, 10-gauge submersible power cord with plug, while the 230V version includes a 70-foot, 12-gauge submersible power cord.

DA-20 1.5 HP

Available in 230V with a 600 GPM flow rate. The 1.5 HP model produces a spray approximately 10 feet high and 25 feet wide.

The 1.5 HP configuration is intended for ponds greater than 1/4 acre and requires a minimum water depth of 38 inches. It includes a 100-foot, 10-gauge submersible power cord.

Optional Lighting

Light kits can be added when ordering the DA-20 or installed later. Lighting provides an illuminated fountain display after dark.

Specifications & Details
Specification Detail
Motor Oil-Free Stainless Steel Submersible Motor
Motor Sizes 1 HP and 1.5 HP
Voltage 1 HP: 115V or 230V; 1.5 HP: 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Power 1 HP: 0.75 kW; 1.5 HP: 1.1 kW
Current Draw 1 HP 115V: 11.5 amps; 1 HP 230V: 8.2 amps; 1.5 HP 230V: 10.6 amps
Flow Rate 1 HP: 500 GPM; 1.5 HP: 600 GPM
Spray Height 1 HP: 7 feet; 1.5 HP: 10 feet
Spray Width 25 feet for both motor configurations
Minimum Depth 36 inches for 1 HP; 38 inches for 1.5 HP
Power Cord 1 HP: 70 feet; 1.5 HP: 100 feet
Cord Gauge 1 HP 115V: 10 AWG; 1 HP 230V: 12 AWG; 1.5 HP 230V: 10 AWG
Anchor Weight Two 35 lb weights or concrete blocks for 1 HP; two 45 lb weights or concrete blocks for 1.5 HP
Water Compatibility Fresh Water or Salt Water
Operation 24 Hours Per Day
Safety GFCI Required; Disconnect Power When Swimmers Are Present
Installation & Assembly

Included Components

The assembly includes the float platform, motor assembly, stainless steel debris shield, and three self-tapping screws. The assembly instructions call for a 3/8-inch wrench or socket screwdriver and two 1/2-inch wrenches or pliers.

Weighted Anchoring

Two 3/8-inch or thicker nylon anchoring lines attach to the unit's two eyebolts. For weighted anchoring, the lines extend outward approximately 25 feet at a 45-degree angle. The weighted anchors are positioned on the pond bottom at least 25 feet apart. Anchor weights are not included.

Shoreline Anchoring

The DA-20 can also be anchored from shore using two 3/8-inch or thicker nylon lines. The manufacturer recommends auger-style earth anchors or posts for shoreline anchoring. Anchoring ropes and shoreline anchors are not included.

Electrical Installation

A GFCI is required for operation, and Scott Aerator recommends using a licensed electrical contractor. The manufacturer specifically states that an extension cord should not be used to supply power to the motor. Proper cable sizing is important to maintain safe operating conditions and protect the motor.

Maintenance & Winter Operation

Routine Maintenance

The DA-20 requires very little routine maintenance under normal operating conditions. Scott Aerator recommends changing the propeller assembly about every five years and replacing quality nylon anchoring rope at five-year intervals when 3/8-inch or thicker rope is used.

Cleaning & Inspection

When the unit is removed from the water for service, wash it with high-pressure water and visually inspect the aerator to make sure debris or other material is not restricting water flow.

Winter Operation

The DA-20 is designed to remain in the water throughout winter. Scott Aerator recommends turning off the power supply during freezing conditions rather than removing the aerator. Once the water thaws in spring, restore power to the unit. The components are designed to withstand sub-zero conditions without damage.

Warranty

5-Year Motor Warranty

Standard Scott Aerator products are unconditionally warranted for five years against motor defects in materials or workmanship under normal operating conditions.

Other product components are covered by a 1-year warranty from the date of purchase, subject to the manufacturer's warranty terms.

Frequently Asked Questions
Question Answer
What is the DA-20 designed to do? The DA-20 is a floating display aerator that circulates large volumes of water while adding oxygen and creating a trumpet-shaped fountain display.
What motor sizes are available? The medium residential DA-20 is available with 1 HP and 1.5 HP motor configurations.
What is the difference between the 1 HP and 1.5 HP models? The 1 HP model provides 500 GPM with a spray approximately 7 feet high by 25 feet wide. The 1.5 HP model provides 600 GPM with a spray approximately 10 feet high by 25 feet wide.
What voltage options are available? The 1 HP model is available in 115V or 230V. The 1.5 HP model is available in 230V.
How deep does the pond need to be? The 1 HP model requires a minimum water depth of 36 inches. The 1.5 HP model requires a minimum water depth of 38 inches.
Can the DA-20 be used in salt water? Yes. The DA-20 is approved for use in salt water as well as fresh water.
Can it run continuously? Yes. The DA-20 is designed for 24-hour-per-day operation.
Does the DA-20 require winterizing? No seasonal removal is required. The manufacturer recommends leaving the unit in the water, turning off the power during freezing conditions, and restoring power after the water thaws.
Is a GFCI required? Yes. A GFCI is required for the DA-20 installation.
Can I use an extension cord? No. The manufacturer specifically states that an extension cord should not be used to supply power to the motor.
How is the DA-20 anchored? The unit uses two nylon anchoring lines attached to its eyebolts. Weighted anchoring uses weights or concrete blocks on the pond bottom, while shoreline anchoring can use auger-style earth anchors or posts.
Are lights available? Yes. Optional light kits can be added when purchasing the DA-20 or installed later.
Downloads

Specs & Assembly

View Specs & Assembly PDF

Aerator Comparison Brochure

View Aerator Comparison Brochure PDF

Product Video

Watch the DA-20 Display Aerator video for an overview of the fountain and its water movement, followed by the assembly video for a visual guide to putting the unit together.

Assembly Video