Scott Aerator Skyward Fountain For Small, Residential Ponds

The cascading Skyward Fountain for small residential ponds

Fishing lake with a fountain in the center, surrounded by trees under a blue sky.

A fountain with a high central jet and wide surrounding spray pattern, situated in a pond with trees in the background.

Scott Aerator Skyward Fountain For Small, Residential Ponds

$2,469.00

Options

Quick Facts

Feature	Detail
Motor	1/2 HP Oil-Free Stainless Steel Submersible Motor
Voltage	115V or 230V
Flow Rate	50 Gallons Per Minute
Spray Pattern	20 Feet High by 30 Feet Wide
Minimum Depth	36 Inches
Operation	Designed for 24-Hour-Per-Day Operation
Water Compatibility	Fresh Water and Salt Water
Motor Warranty	5 Years
Light Options	Optional LED Light Sets

A Note Before You Order

Select the correct motor voltage and power configuration before purchasing. For proper operation of the 115V motor, the distance from the main breaker to the fountain should not exceed 100 feet. If the installation requires a greater distance, select a 230V motor and use the appropriate cable size for the installation. A GFCI is required, and the manufacturer recommends using a licensed electrical contractor. Do not use an extension cord to supply power to the motor. Always disconnect power when swimmers are present.

Scott Aerator Skyward Fountain for Small, Residential Ponds

The Skyward Fountain is a decorative pond fountain designed for smaller residential ponds. Its 1/2 HP motor produces a cone-shaped spray with a tall center jet, creating a 20-foot-high by 30-foot-wide display that can be adjusted for spray height.

The fountain uses an all-brass, precision-machined nozzle and an oil-free stainless steel submersible motor. Along with creating a visible water display, the fountain circulates water and helps increase oxygen levels throughout the pond. Optional LED light sets can be added for nighttime operation.

The Skyward is designed for fresh or salt water and can operate continuously. The stainless steel motor requires no oil changes and the fountain does not require a control box. The unit is made in the USA and includes a 5-year motor warranty.

Configuration Guide

1/2 HP 115V

The 1/2 HP 115V Skyward Fountain uses a single-phase, 60 Hz motor operating at 3,450 RPM with a 50 GPM flow rate. The supplied power cord is 70 feet long, 12-gauge, submersible, and includes a plug.

For proper operation, the distance from the main breaker to the fountain should not exceed 100 feet.

1/2 HP 230V

The 1/2 HP 230V Skyward Fountain uses a single-phase, 60 Hz motor operating at 3,450 RPM with a 50 GPM flow rate. The supplied power cord is 70 feet long and 12-gauge submersible cable.

The 230V configuration is suitable for installations where the required distance from the main breaker exceeds the recommended range for the 115V configuration, provided the correct cable size is used.

Optional LED Lighting

LED light sets can be added to the Skyward Fountain at the time of purchase or later. Lighting provides an illuminated display after dark and is available in multiple configurations.

Anchoring Requirements

Two nylon anchoring lines and two weighted anchors are required. The anchors should be positioned on the pond bottom at least 20 feet apart. Anchoring ropes and weights are not included with the fountain.

Specifications & Details

Specification	Detail
Motor	1/2 HP Oil-Free Stainless Steel Submersible Motor
Voltage	115V or 230V
Power	0.37 kW
Frequency	60 Hz
Phase	Single Phase
Motor Speed	3,450 RPM
Flow Rate	50 GPM
Spray Height	20 Feet, Adjustable
Spray Width	30 Feet
Minimum Pond Depth	36 Inches
Power Cord	70 Feet Standard, 12 Gauge; Longer Cords Available
115V Current Draw	10 Amps
230V Current Draw	5 Amps
Water Compatibility	Fresh Water or Salt Water
Operation	24 Hours Per Day
Warranty	5-Year Motor Warranty

Installation & Assembly

Included Components

The fountain assembly includes the float platform, pump assembly, stainless steel filter, stainless steel bolts, nuts, washers, and stainless steel screws. A 5/16-inch wrench or socket driver and two 1/2-inch wrenches or pliers are the recommended assembly tools.

Float & Filter Assembly

The float is secured to the fountain housing with the supplied stainless steel hardware. The stainless steel filter is installed underneath the fountain and secured with the supplied screws. Care should be taken not to place the weight of the fountain directly on the filter during handling.

Anchoring

Two nylon ropes attach to the stainless steel eye bolts and serve as the anchoring lines. The fountain can be secured to shore or anchored with two submerged concrete blocks positioned at least 20 feet apart. Nylon rope and concrete blocks are not included.

Electrical Installation

A GFCI is required for operation. The installation instructions recommend using a licensed electrical contractor. Never use an extension cord to supply power to the motor, and always disconnect power when swimmers are present.

Maintenance & Winter Operation

Routine Maintenance

The Skyward requires little routine maintenance under normal operating conditions. When the fountain is removed from the water, wash the unit with high-pressure water and inspect the entire fountain to make sure nothing is restricting water flow.

Anchoring Rope Replacement

Quality nylon anchoring rope measuring 3/8 inch or thicker should be replaced approximately every five years. Inspect the ropes periodically for deterioration or wear.

Winter Operation

The manufacturer recommends leaving the fountain in the water during winter rather than removing it. Turn off the power supply while the water is frozen and restore power after the water thaws. The fountain components are designed to withstand sub-zero conditions.

Warranty

5-Year Motor Warranty

The Skyward Fountain includes a 5-year motor warranty. The manufacturer states that its fountains carry an unconditional 5-year motor warranty.

Warranty coverage remains subject to the manufacturer's applicable warranty terms and conditions.

Frequently Asked Questions

Question	Answer
What is the Skyward Fountain designed for?	The Skyward is a decorative pond fountain designed for smaller residential ponds. It creates a tall center jet with a cone-shaped spray while also circulating water and increasing oxygen levels.
What motor size does the small residential Skyward use?	The small residential Skyward Fountain uses a 1/2 HP motor available in either 115V or 230V configurations.
How large is the Skyward spray?	The 1/2 HP Skyward produces a spray approximately 20 feet high and 30 feet wide. The spray height can be adjusted.
What pond depth is required?	A minimum pond depth of 36 inches is required for the 1/2 HP Skyward Fountain.
Can the Skyward be used in salt water?	Yes. The Skyward Fountain is designed for use in both fresh water and salt water.
Can it run continuously?	Yes. The Skyward Fountain is designed for 24-hour-per-day operation.
Does the Skyward require a GFCI?	Yes. A GFCI is required for operation, and the manufacturer recommends using a licensed electrical contractor for the electrical installation.
Can I use an extension cord?	No. The manufacturer specifically states that an extension cord should not be used to supply power to the motor.
What is included for anchoring?	Two nylon anchoring lines and two weighted anchors are required, but the anchoring ropes and weights are not included with the fountain.
Can LED lights be added?	Yes. LED light sets can be added when purchasing the fountain or installed later.
Does the fountain need to be removed for winter?	No. The manufacturer recommends leaving the fountain in the water, turning the power off while the water is frozen, and restoring power after the water thaws.

Downloads

Pond Fountain Motor Specs

View Pond Fountain Motor Specs PDF

Pond Fountain Specs & Assembly

View Pond Fountain Specs & Assembly PDF

Pond Fountain Comparison Brochure

View Pond Fountain Comparison Brochure PDF

Product Video

Watch the Skyward Fountain video to see the fountain spray pattern, operation, and overall water display.