Close-up studio photo of an AquaSweep muck mover unit with metal housing and protective intake cage visible, shown against a dark gradient background.
Promotional image for the Dock Mount Aquasweep featuring a before and after comparison of a waterfront area cleaned by the product, with a person standing on a dock and water flowing around.
Dock Plate
Infographic showing a Scott Aerator/AquaSweep unit on the left and water coverage range diagrams on the right, detailing lake bottom and surface water flow distances for 1/2 HP, 3/4 HP, and 1 HP models around a dock from aerial view.
Product display showing AquaSweep equipment and mounting accessories against a white background, including a tall mounting pole, dock plate mounting example, oscillating attachment, truss mount bracket, and dock post bracket add-ons.
Dock mount zoom
Aquasweep Specifications table with various parameters and their values.
Authorized Dealer
Scott Aerator

Scott Aerator

Scott Aerator Dock Mount AquaSweep®

$1,599.00

In stock
Motor: ⅓ hp 115 volts
  • ⅓ hp 115 volts
  • ⅓ hp 230 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
Cord Length: 50 feet
  • 50 feet
  • 100 feet

Estimated delivery between October 25 and October 27.

Free Shipping
Residential and Commercial Use
Backed by Real Expert Support
Delivered With Care, Direct to Your Door
Scott Aerator Dock Mount AquaSweep®

$1,599.00

$1,599.00

Options
Motor: ⅓ hp 115 volts
  • ⅓ hp 115 volts
  • ⅓ hp 230 volts
  • ½ hp 115 volts
  • ½ hp 230 volts
  • ¾ hp 115 volts
  • ¾ hp 230 volts
  • 1 hp 115 volts
  • 1 hp 230 volts
Cord Length: 50 feet
  • 50 feet
  • 100 feet

Quick Facts

Feature Detail
Motor Options 1/3 HP, 1/2 HP, 3/4 HP, or 1 HP
Voltage 115V or 230V
Water Flow 300 to 500 GPM, depending on motor size
Flow Distance 40 to 75 feet, depending on motor size
Mounting Standard Stainless Steel Dock Mounting Plate
Motor Oil-Free, Fully Submersible Motor
Operation Designed for 24-Hour Continuous Operation
Water Compatibility Fresh Water and Salt Water
Motor Warranty 5 Years

A Note Before You Order

Select the correct motor voltage and cable configuration for your installation. A GFCI-protected circuit is required. Always disconnect power whenever swimmers are present, and do not use an extension cord to supply power to the motor. The standard Dock Mount AquaSweep includes a 50-foot submersible power cable, with longer cable lengths available.

Scott Aerator Dock Mount AquaSweep®

The Dock Mount AquaSweep® is designed to move muck, silt, weeds, algae, leaves, and floating debris away from docks, swimming areas, beaches, boat lifts, and other waterfront spaces. Its high-velocity water flow helps clear unwanted material from the surface and bottom while improving water movement around the shoreline.

The AquaSweep® uses an oil-free, fully submersible motor and a protective stainless steel debris shield that helps prevent weeds and other material from clogging the moving parts. The dock-mounted design allows the unit to be positioned vertically and aimed toward the area that needs clearing. For bottom muck removal, Scott Aerator recommends positioning the unit approximately 2 to 4 inches from the lake or pond bottom.

Configuration Guide

AquaSweep 1/3 HP

Available in 115V or 230V configurations with a 300 GPM flow rate and a 40-foot flow distance.

The 1/3 HP model operates at 3,450 RPM and is supplied with a 50-foot submersible power cable.

AquaSweep 1/2 HP

Available in 115V or 230V configurations with a 400 GPM flow rate and a 40-foot flow distance.

The 1/2 HP model operates at 3,450 RPM and is supplied with a 50-foot submersible power cable.

AquaSweep 3/4 HP

Available in 115V or 230V configurations with a 450 GPM flow rate and a 60-foot flow distance.

The 3/4 HP model operates at 3,450 RPM and is supplied with a 50-foot submersible power cable.

AquaSweep 1 HP

Available in 115V or 230V configurations with a 500 GPM flow rate and a 75-foot flow distance.

The 1 HP model operates at 3,450 RPM and is supplied with a 50-foot submersible power cable.

Specifications & Details
Specification Detail
Motor Oil-Free, Fully Submersible Electric Motor
Motor Sizes 1/3 HP, 1/2 HP, 3/4 HP, and 1 HP
Voltage 115V or 230V
Frequency 60 Hz
Phase Single Phase
Motor Speed 3,450 RPM
Flow Rate 300, 400, 450, or 500 GPM
Flow Distance 40 feet for 1/3 HP and 1/2 HP; 60 feet for 3/4 HP; 75 feet for 1 HP
Power Cable 50 feet standard, submersible cable; longer lengths available
Cable Gauge 12 AWG standard; 10 AWG supplied with 3/4 HP 115V and 1 HP 115V models
Construction High-Density Polyurethane and Stainless Steel
Water Compatibility Fresh Water and Salt Water
Operation 24 Hours Per Day, 7 Days Per Week
Unit Length Over 7 Feet
Unit Weight Approximately 55 to 68 Pounds
Installation & Assembly

Dock Mount Installation

The included stainless steel dock mounting plate is designed for installation on a sturdy wooden or metal dock. The mounting plate secures to the dock using the supplied Phillips head screws. Pilot holes can be drilled when needed to help prevent cracking of deck material.

Positioning

For bottom muck removal, position the AquaSweep approximately 2 to 4 inches from the lake or pond bottom. The installation guide specifies a minimum water depth of 12 inches. The unit can be vertically adjusted and aimed to direct water flow toward the area being cleared.

Included Components

The Dock Mount kit includes the AquaSweep housing and yoke, stainless steel debris shield, stainless steel pole, dock mounting plate, lubricating compound, thumb screws, self-tapping screws, and Phillips head screws.

Electrical Safety

Connect the unit only to a GFCI-protected circuit. Always disconnect the power source when swimmers are present. Do not use an extension cord to supply power to the motor.

Optional Mounting Upgrades

Alternative mounting options include a dock post bracket, truss mount, tripod mount, and quick release adapter. These options can provide additional installation flexibility depending on the dock or shoreline configuration.

Maintenance & Winter Operation

Routine Maintenance

The AquaSweep requires very little routine maintenance. When the unit is removed from the water, wash it with high-pressure water and inspect the housing, debris shield, and water path to make sure nothing is restricting flow.

Propeller Replacement

Scott Aerator recommends replacing the AquaSweep propeller assembly approximately every three years as a general maintenance interval. The propeller can be replaced on site.

Thumb Screw Lubrication

Periodically lubricate the stainless steel thumb screws with the supplied stainless-steel lubricating compound. The manufacturer states that regular lubrication helps maintain proper operation and is required for warranty validation.

Winter Operation

The AquaSweep is engineered for year-round operation and may also be unplugged and left installed during winter. If the unit is removed from the pond or lake, the pump should be stored submerged in a 5-gallon bucket of water to help prevent damage to the pump seals.

Warranty

5-Year Motor Warranty

The AquaSweep motor is covered by a 5-year warranty against defects in materials or workmanship under normal operating conditions.

Other product components are covered by a 1-year warranty from the date of purchase, subject to the manufacturer's warranty terms.

Frequently Asked Questions
Question Answer
What is the AquaSweep designed to do? It is designed to move muck, silt, weeds, algae, leaves, and other unwanted debris away from docks, swimming areas, beaches, boat lifts, and shorelines.
What motor sizes are available? The Dock Mount AquaSweep is available with 1/3 HP, 1/2 HP, 3/4 HP, and 1 HP motors.
Can the AquaSweep be used in salt water? Yes. The AquaSweep is approved for use in both fresh water and salt water.
Can it run continuously? Yes. Scott Aerator states that its fountain and aerator products are engineered for 24-hour-per-day, 7-day-per-week operation, and the AquaSweep is designed for continuous use.
How close should the AquaSweep be to the bottom? For bottom muck removal, Scott Aerator recommends positioning the unit approximately 2 to 4 inches from the lake or pond bottom.
What is the minimum water depth? The installation guide specifies a minimum water depth of 12 inches for the Dock Mount AquaSweep.
Is a GFCI required? Yes. The AquaSweep must be connected to a GFCI-protected circuit.
Can I use an extension cord? No. The manufacturer specifically states that an extension cord should not be used to supply power to the motor.
Does it require routine maintenance? The AquaSweep requires very little maintenance. The manufacturer recommends inspecting and cleaning the unit when removed from the water and replacing the propeller assembly approximately every three years.
Can it remain installed during winter? Yes. The AquaSweep is engineered for year-round operation and may be unplugged and left installed during winter. If removed, the pump should be stored submerged in water to protect the seals.
What mounting options are available? The standard configuration includes a dock mounting plate. Dock post, truss, tripod, and quick release mounting options are also available.
Downloads

AquaSweep® Specs & Assembly

View AquaSweep® Specs & Assembly PDF

Product Video

Watch the AquaSweep® videos below for product demonstrations, assembly information, and installation guidance.